Bone and Shell

BONE and SHELL

HOME ORDER ONLINE PRODUCTS REGISTER WHAT'S NEW?

DESCRIPTION

Price

Click on Part ID to add to shopping cart

PART No. BONE NUTS Each
12+

PBNW
Classic, 55 X 10 X 8mm
$2.70

$2.25

PBNS
Steel string, 55 X 9 X 6mm
$2.70

$2.25

PART No. BONE SADDLES Each
12+

PBNSDS
Standard, 82 X 8 X 2.4mm (3/32")
$2.70

$2.25

PBNSDT
Tall, 82 X 12 X 3.2mm (1/8")
$2.70

$2.25

PBNSDW
Wide, 82 X 10 X 6.5mm (1/4")
$2.70

$2.25

PART No. SHELL DOTS Each
50+

MOPD2
MOP position marker, 2mm
$.45

$.30

MOPD2.5
MOP position marker, 2.5mm
$.45

$.30

MOPD6
MOP position marker, 6mm
$.45

$.30

MOPD6.3
MOP position marker, 6.3mm (1/4")
$.45

$.30

PART No. SHELL SLAB Each

MOPSLGW Mother of pearl, .060", per 1/2 lb.
$60

PREDAB060 Red Abalone, .060" (about 3" sq. per/oz.)
$50

BONE
Ox bone is the traditional favorite of luthiers. That's because it's the bone that's mostly available. If sheep bone were readily availalbe it would be the favorite as it's harder and whiter. Bone is about .5 MOHS harder than ivory, and actually serves the purpose better than ivory. We don't stock large quantities of bone because we get better quality if we limit the size of our orders to about 500 pieces per shipment. If you have a special size you'd like we can special order it for you, with a minimum of 250 pieces.
Price List
Download in PDF Format, 4 pages tabloid size.

Soundboards

Backs & Sides

Electric Woods

Fingerboards

Neck Blanks

Kerfing

Bracewood

Bridgeblanks

Headplates

Binding

Laminates

Purfling

Tools

Fretwire

Plans

Tuning Machines

Truss rods

Bone/Shell

Bridge & End pins

Rosettes/Veneers

Above heel cap inlay on guitar made by Tom Ribbecke, inlayed by Larry Robinson.

SHELL

For the time being we carry only Mother of pearl dots and slab in red abalone and MOP as pictured. The Mop Slab is offered by the half pound, and the abalone slab is offered by the ounce.

Some vendors sell MOP of this quality and size (and amount) for well over $120, so this is a good deal. There are around 50 pieces of an average size of 2 square inches to a half pound. At .060" the blanks are thick enough for use where radiusing is required.

Left, inlay artist Larry Robinson dropped by recently along with his personal guitar (made by local, Mark Johnson of MJ Guitars) but with Larry's handiwork on the mahogany back. More pics of Larry's work later.

Address General Information Sales/support
Telephone:
707-431-3760

POB 217, 498 A Moore Lane, Healdsburg, Ca. 95448 USA info@alliedlutherie.com sales@alliedlutherie.com
Fax:
707-431-3762

DESCRIPTION		Price
Click on Part ID to add to shopping cart
PART No.	BONE NUTS	Each	12+
PBNW	Classic, 55 X 10 X 8mm	$2.70	$2.25
PBNS	Steel string, 55 X 9 X 6mm	$2.70	$2.25
PART No.	BONE SADDLES	Each	12+
PBNSDS	Standard, 82 X 8 X 2.4mm (3/32")	$2.70	$2.25
PBNSDT	Tall, 82 X 12 X 3.2mm (1/8")	$2.70	$2.25
PBNSDW	Wide, 82 X 10 X 6.5mm (1/4")	$2.70	$2.25
PART No.	SHELL DOTS	Each	50+
MOPD2	MOP position marker, 2mm	$.45	$.30
MOPD2.5	MOP position marker, 2.5mm	$.45	$.30
MOPD6	MOP position marker, 6mm	$.45	$.30
MOPD6.3	MOP position marker, 6.3mm (1/4")	$.45	$.30
PART No.	SHELL SLAB	Each
MOPSLGW	Mother of pearl, .060", per 1/2 lb.	$60
PREDAB060	Red Abalone, .060" (about 3" sq. per/oz.)	$50

	BONE Ox bone is the traditional favorite of luthiers. That's because it's the bone that's mostly available. If sheep bone were readily availalbe it would be the favorite as it's harder and whiter. Bone is about .5 MOHS harder than ivory, and actually serves the purpose better than ivory. We don't stock large quantities of bone because we get better quality if we limit the size of our orders to about 500 pieces per shipment. If you have a special size you'd like we can special order it for you, with a minimum of 250 pieces.	Price List Download in PDF Format, 4 pages tabloid size. Soundboards Backs & Sides Electric Woods Fingerboards Neck Blanks Kerfing Bracewood Bridgeblanks Headplates Binding Laminates Purfling Tools Fretwire Plans Tuning Machines Truss rods Bone/Shell Bridge & End pins Rosettes/Veneers

	Above heel cap inlay on guitar made by Tom Ribbecke, inlayed by Larry Robinson.
SHELL For the time being we carry only Mother of pearl dots and slab in red abalone and MOP as pictured. The Mop Slab is offered by the half pound, and the abalone slab is offered by the ounce.	Some vendors sell MOP of this quality and size (and amount) for well over $120, so this is a good deal. There are around 50 pieces of an average size of 2 square inches to a half pound. At .060" the blanks are thick enough for use where radiusing is required.
	Left, inlay artist Larry Robinson dropped by recently along with his personal guitar (made by local, Mark Johnson of MJ Guitars) but with Larry's handiwork on the mahogany back. More pics of Larry's work later.


Address	General Information	Sales/support	Telephone:	707-431-3760
POB 217, 498 A Moore Lane, Healdsburg, Ca. 95448 USA	info@alliedlutherie.com	sales@alliedlutherie.com	Fax:	707-431-3762